Featured Article

Dreaming of Mars, the startup Relativity Space gets its first launch site on Earth

“Our vision is to 3D print the first rocket on Mars”

Comment

3D-printing the first rocket on Mars.

That’s the goal Tim Ellis and Jordan Noone set for themselves when they founded Los Angeles-based Relativity Space in 2015.

At the time they were working from a WeWork in Seattle, during the darkest winter in Seattle history, where Ellis was wrapping up a stint at Blue Origin. The two had met in college at USC in their jet propulsion lab. Noone had gone on to take a job at SpaceX and Ellis at Blue Origin, but the two remained in touch and had an idea for building rockets quickly and cheaply — with the vision that they wanted to eventually build these rockets on Mars.

Now, more than $35 million dollars later, the company has been awarded a multi-year contract to build and operate its own rocket launch facilities at Cape Canaveral Air Force Station in Florida.

That contract, awarded by The 45th Space Wing of the Air Force, is the first direct agreement the U.S. Air Force has completed with a venture-backed orbital launch company that wasn’t also being subsidized by billionaire owner-operators.

By comparison, Relativity’s neighbors at Cape Canaveral are Blue Origin (which Jeff Bezos has been financing by reportedly selling $1 billion in shares of Amazon stock since 2017); SpaceX (which has raised roughly $2.5 billion since its founding and initial capitalization by Elon Musk); and United Launch Alliance, the joint venture between the defense contracting giants Lockheed Martin Space Systems and Boeing Defense.

Like the other launch sites at Cape Canaveral, Launch Complex 16, where Relativity expects to be launching its first rockets by 2020, has a storied history in the U.S. space and missile defense program. It was used for Titan missile launches, the Apollo and Gemini programs and Pershing missile launches.

From the site, Relativity will be able to launch its first designed rocket, the Terran 1, which is the only fully 3D-printed rocket in the world.

That rocket can carry a maximum payload of 1,250 kilograms to a low earth orbit of 185 kilometers above the Earth. Its nominal payload is 900 kilograms of a Sun-synchronous orbit 500 kilometers out, and it has a 700 kilogram high-altitude payload capacity to 1,200 kilometers in Sun-synchronous orbit. Relativity prices its dedicated missions at $10 million, and $11,000 per kilogram to achieve Sun-synchronous orbit.

If the company’s two founders are right, then all of this launch work Relativity is doing is just a prelude to what the company considers to be its real mission — the advancement of manufacturing rockets quickly and at scale as a test run for building out manufacturing capacity on Mars.

“Rockets are the business model now,” Ellis told me last year at the company’s offices at the time, a few hundred feet from SpaceX. “That’s why we created the printing tech. Rockets are the largest, lightest-weight, highest-cost item that you can make.”

It’s also a way for the company to prove out its technology. “It benefits the long-term mission,” Ellis continued. “Our vision is to create the intelligent automated factory on Mars… We want to help them to iterate and scale the society there.”

3D-printed rocket maker Relativity raises $35M to simplify satellite launches

Ellis and Noone make some pretty remarkable claims about the proprietary 3D printer they’ve built and housed in their Inglewood offices. Called “Stargate,” the printer is the largest of its kind in the world and aims to go from raw materials to a flight-ready vehicle in just 60 days. The company claims that the speed with which it can manufacture new rockets should pare down launch timelines by somewhere between two and four years.

Another factor accelerating Relativity’s race to market is a long-term contract the company signed last year with NASA for access to testing facilities at the agency’s Stennis Space Center on the Mississippi-Louisiana border. It’s there, deep in the Mississippi delta swampland, that Relativity plans to develop and quality control as many as 36 complete rockets per year on its 25-acre space.

All of this activity helps the company in another segment of its business: licensing and selling the manufacturing technology it has developed.

“The 3D factory and automation is the other product, but really that’s a change in emphasis,” says Ellis. “It’s always been the case that we’re developing our own metal 3D printing technology. Not only can we make rockets. If the long-term mission is 3D printing on Mars, we should think of the factory as its own product tool.”

Not everyone agrees. At least one investor I talked to said that in many cases, the cost of 3D printing certain basic parts outweighs the benefits that printing provides.

Still, Relativity is undaunted.

But first, the company — and its competitors at Blue Origin, SpaceX, United Launch Alliance and the hundreds of other companies working on launching rockets into space again — need to get there. For Relativity, the Canaveral deal is one giant step for the company, and one great leap toward its ultimate goal.

“This is a giant step toward being a launch company,” says Ellis. “And it’s aligned with the long-term vision of one day printing on Mars.”

More TechCrunch

Gorilla, a Belgian company that serves the energy sector with real-time data and analytics for pricing and forecasting, has raised €23 million ($25 million) in a Series B round led…

Gorilla, a Belgian startup that helps energy providers crunch big data, raises $25M

South Korea’s fabless AI chip industry saw a slew of fundraising events over the last couple of years as demand for hardware to power AI applications skyrocketed, and it seems…

Fabless AI chip makers Rebellions and Sapeon to merge as competition heats up in global AI hardware industry

Here’s a list of third-party apps that were Sherlocked by Apple at this year’s WWDC.

The apps that Apple Sherlocked at WWDC 2024

Black Semiconductor, which is developing a chip-connecting technology based on graphene, has raised $273M in a combination of private and public funding. 

Germany’s Black Semiconductor raises $273M for graphene-based chip connectivity tech

Featured Article

Let there be Light! Danish startup exits stealth with $13M seed funding to bring AI to general ledgers

It’s not the sexiest of subject matters, but someone needs to talk about it: The CFO tech stack — software used by the chief financial officers of the world — is ripe for disruption. That’s according to Jonathan Sanders, CEO and co-founder of fledgling Danish startup Light, which exits stealth…

3 hours ago
Let there be Light! Danish startup exits stealth with $13M seed funding to bring AI to general ledgers

Fresh off the success of its first mission, satellite manufacturer Apex has closed $95 million in new capital to scale its operations.  The Los Angeles-based startup successfully launched and commissioned…

Apex’s off-the-shelf satellite bus business attracts $95M in new funding

After educating the D.C. market, YC aims to leverage its influence, particularly in areas like competition policy.

DC’s political class doesn’t know Y Combinator exists — yet

Lina Khan says the FTC wants to be effective in its enforcement strategy, which is why it has been taking on lawsuits that “go up against some of the big…

FTC Chair Lina Khan tells TechCrunch the agency is pursuing the ‘mob bosses’ in Big Tech

With dozens of antitrust cases and close to a hundred on the consumer protection side, the agency is now turning to innovative tactics to help it fight fraud, particularly in…

FTC Chair Lina Khan shares how the agency is looking at AI

The ability to pause your activity rings is a minor feature update for most, but for those of us who obsess about such things to an unhealthy degree, it’s the…

Apple Watch is finally adding a feature I’ve been requesting for years

Featured Article

Why Apple is taking a small-model approach to generative AI

It’s a very Apple approach in the sense that it prioritizes a frictionless user experience above all.

11 hours ago
Why Apple is taking a small-model approach to generative AI

When generative AI tools started making waves in late 2022 after the launch of ChatGPT, the finance industry was one of the first to recognize these tools’ potential for speeding…

Linq raises $6.6M to use AI to make research easier for financial analysts

In addition to the federal funding, the state of New Mexico — where SolAero is based — committed to providing financing and incentives that value $25.5 million.

Biden administration looks to give Rocket Lab $24M to boost space-grade solar cell production

Some of the new Apple Intelligence features that Apple debuted at WWDC 2024 don’t even feel like AI, they just feel like smarter tools. 

Apple’s AI, Apple Intelligence, is boring and practical — that’s why it works

The TechCrunch team runs down all of the biggest news from the Apple WWDC 2024 keynote in an easy-to-skim digest.

Here’s everything Apple announced at the WWDC 2024 keynote, including Apple Intelligence, Siri makeover

Jordan Meyer and Mathew Dryhurst founded Spawning AI to create tools that help artists exert more control over how their works are used online. Their latest project, called Source.Plus, is…

Spawning wants to build more ethical AI training datasets

After leading the social media landscape, TikTok appears to be interested in challenging Google’s dominance in search. The company confirmed to TechCrunch that it’s testing the ability for users to…

TikTok comes for Google as it quietly rolls out image search capabilities in TikTok Shop

General Motors is investing $850 million into Cruise as the autonomous vehicle subsidiary slowly makes its way back to testing in Phoenix, Dallas and, as of Tuesday, Houston. GM’s CFO…

GM gives Cruise $850M lifeline as it relaunches robotaxis in Houston

These messaging features, announced at WWDC 2024, will have a significant impact on how people communicate every day.

At last, Apple’s Messages app will support RCS and scheduling texts

Welcome to TechCrunch Fintech! This week, we’re looking at Rippling’s controversial decision to ban some former employees from selling their stock, Carta’s massive valuation drop, a GenZ-focused fintech raise, and…

Rippling’s tender offer decision draws mixed — and strong — reactions

Google is finally making its Gemini Nano AI model available to Pixel 8 and 8a users after teasing it in March.

Google’s June Pixel feature drop brings Gemini Nano AI model to Pixel 8 and 8a users

At WWDC 2024, Apple introduced new options for developers to promote their apps and earn more from them in the App Store.

Apple adds win-back subscription offers and improved search suggestions to the App Store

iOS 18 will be available in the fall as a free software update.

Here are all the devices compatible with iOS 18

The acquisition comes as BeReal was struggling to grow its user base and was looking for a buyer.

BeReal is being acquired by mobile apps and games company Voodoo for €500M

Unlike Light’s older phones, the Light III sports a larger OLED display and an NFC chip to make way for future payment tools, as well as a camera.

Light introduces its latest minimalist phone, now with an OLED screen but still no addictive apps

Since April, a hacker with a history of selling stolen data has claimed a data breach of billions of records — impacting at least 300 million people — from a…

The mystery of an alleged data broker’s data breach

Diversity Spotlight is a feature on Crunchbase that lets companies add tags to their profiles to label themselves.

Crunchbase expands its diversity-tracking feature to Europe

Thanks to Apple’s newfound — and heavy — investment in generative AI tech, the company had loads to showcase on the AI front, from an upgraded Siri to AI-generated emoji.

The top AI features Apple announced at WWDC 2024

A Finnish startup called Flow Computing is making one of the wildest claims ever heard in silicon engineering: by adding its proprietary companion chip, any CPU can instantly double its…

Flow claims it can 100x any CPU’s power with its companion chip and some elbow grease

Five years ago, Day One Ventures had $11 million under management, and Bucher and her team have grown that to just over $450 million.

The VC queen of portfolio PR, Masha Bucher, has raised her largest fund yet: $150M